Cursos Servidores con Centos 6
Sistema Operativo ALDOS
MongoDB Banner
Curso PHP
Dezoft

Si algunos de nuestros foros, manuales, ALDOS, paquetería o proyectos te han resultado de ayuda, apreciaremos mucho nos apoyes con un donativo.

Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.

A todos nuestros usuarios de AL Desktop y equipamiento lógico de Alcance Libre les hacemos llegar el siguiente comunicado:

A fin de mejorar (y en algunos casos, corregir) el soporte de dispositivos como unidades USB (por ejemplo, memorias Flash con formato NTFS y otros), detección de Escaners e impresoras y otros dispositivos, AL Desktop actualizará hacia Udev 113, Hal 0.5.10 y Dbus 1.0.2. Lo anterior no implicará más allá de reiniciar el sistema, una vez instaladas las actualizaciones, a fin de permitir que todo funcione correctamente, siendo que el sistema necesita iniciar con la versión actualizada de Udev para que funcionen Dbus y Hal. Esto tendrá como benefició poder contar con un mejor y más amplio soporte para Hardware y Software. Los paquetes de actualización estarán disponibles en los depósitos de AL Desktop a partir de mañana.

Atentamente.
Joel Barrios Dueñas
Director General de Alcance Libre, A.C.


Atención: Salvo que se indique lo contrario, la licencia del texto de este documento es Creative Commons Reconocimiento 2.5, mediante la cual usted tiene permitido copiar, modificar, comunicar y distribuir el contenido de este texto, de manera total o parcial, y publicarlo o difundirlo en cualquier otro sitio de Internet o medio de comunicaciòn, siempre y cuando incluya o cite (1)el nombre de este sitio de Internet, (2)enlace permanente de este documento, (3)nombre del autor y (4)la misma licencia de distribución.

Opciones: Imprimir | Recomendar | Enlace permanente

Twitter Facebook Google Bookmarks Bitacoras.com Wikio Menéame Technorati Bloglines Digg Yahoo Buzz

Seguimiento

TURL de seguimiento para esta entrada:
http://www.alcancelibre.org/trackback.php/20071121104610788
  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • 12comentarios
  • Crea una cuenta nueva
Agrega un comentario

Los siguientes comentarios son de la persona que los haya enviado. Este sitio no se hace responsable de las opiniones expresadas por los participantes en los foros y secciones de comentarios, y el hecho de publicar las mismas no significa que esté de acuerdo con ellas.

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Angel Martinez Rodriguez sobre 27/11/2007, 01:58
Hola joel, antes que nada quiero felicitarte y darte gracias por mantener tanto el sitio como el mirrror.

Quiero comentarte que en esta actualizacion despues de realizarla me doy cuenta de que las memorias las tengo que montar a patin lo cual antes no era necesario y quiero saber si esto es asi o solo me pasa a mi.

Te agradesco y espero tu repuesta
Saludos desde GDL

---
*******anix_gdl********

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Joel Barrios Dueñas sobre 27/11/2007, 05:36
¿Reinicaste el sistema luego de actualizar? Las memorias deben poderse montar automáticamente.

---
--
Joel Barrios Dueñas.
Director General Alcance Libre, A.C.
http://www.AlcanceLibre.org/
La libertad del conocimiento al alcance de quien la busca.

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Angel Martinez Rodriguez sobre 27/11/2007, 19:45
Si ya reinicie, desde que instale, sabes que puedo hacer.

---
*******anix_gdl********

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Tereso Ramos sobre 29/11/2007, 17:11
Prueba creando un usuario nuevo y si te las monta sin problemas, entonces elimina tu configuración de Gnome.

---
~ Mas allá de lo invisible ~

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Angel Martinez Rodriguez sobre 29/11/2007, 17:53
Tampoco con el nuevo usuario las monta de manera automatica, el problema me surgio en 2  equipos pero en el que me urge es el de mi casa,<pues es el que usa mi familia.

Te agradesco y espero nueva respuesta

---
*******anix_gdl********

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Joel Barrios Dueñas sobre 29/11/2007, 21:42
verifica si arranca el servicio haldaemon:

service haldaemon restart

Si marca algún error, ejecuta hald así y publica lasalida:

hald --daemon=no --verbose=yes

---
--
Joel Barrios Dueñas.
Director General Alcance Libre, A.C.
http://www.AlcanceLibre.org/
La libertad del conocimiento al alcance de quien la busca.

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Angel Martinez Rodriguez sobre 29/11/2007, 22:20
no arranca el haldaemond  desde que arranca la maquina lo intento reiniciar y tampoco, de totodos modos necesitas la salida de el hald --daemon=no --verbose=yes
??????

---
*******anix_gdl********

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Joel Barrios Dueñas sobre 30/11/2007, 18:50
Si. De otra forma no puedo saber cual es el problema y como resolverlo.

---
--
Joel Barrios Dueñas.
Director General Alcance Libre, A.C.
http://www.AlcanceLibre.org/
La libertad del conocimiento al alcance de quien la busca.

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Angel Martinez Rodriguez sobre 01/12/2007, 03:45
[root@localhost ~]# service haldaemon restart
Stopping HAL daemon:                                       [FAILED]
Starting HAL daemon:                                       [FAILED]
[root@localhost ~]# cat hal | more
4746: attempting to get lock on /var/lib/hal/acl-list
4746: got lock on /var/lib/hal/acl-list
4746: invoking 'setfacl -x u:42 /dev/audio -x u:42 /dev/dsp -x u:42 /dev/mixer -x u:42 /dev/sequencer -x u:42 /dev
/sequencer2 -x u:42 /dev/snd/controlC0 -x u:42 /dev/snd/pcmC0D0c -x u:42 /dev/snd/pcmC0D0p -x u:42 /dev/snd/pcmC0D
6c -x u:42 /dev/snd/pcmC0D6p -x u:42 /dev/snd/seq -x u:42 /dev/snd/timer'
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0_0, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_oss_mixer__1, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/computer_oss_sequencer, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/computer_oss_sequencer_0, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_alsa_control__1, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_0, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_0, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_6, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_6, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/computer_alsa_sequencer, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/computer_alsa_timer, uid 42
4746: released lock on /var/lib/hal/acl-list
in hal-storage-cleanup-all-mountpoints
hal_mtab = ''
4760: attempting to get lock on /var/lib/hal/acl-list
4760: got lock on /var/lib/hal/acl-list
4760: adding ACL's for /dev/snd/pcmC0D6p
4760: invoking 'setfacl -m u:42:rw /dev/snd/pcmC0D6p'
4760: setfacl(1) exit code != 0 but OK as some missing files are expected
4760: released lock on /var/lib/hal/acl-list
4766: attempting to get lock on /var/lib/hal/acl-list
4766: got lock on /var/lib/hal/acl-list
4766: adding ACL's for /dev/snd/seq
4766: invoking 'setfacl -m u:42:rw /dev/snd/seq'
4766: setfacl(1) exit code != 0 but OK as some missing files are expected
4766: released lock on /var/lib/hal/acl-list
4768: attempting to get lock on /var/lib/hal/acl-list
4768: got lock on /var/lib/hal/acl-list
4768: adding ACL's for /dev/sequencer
4768: invoking 'setfacl -m u:42:rw /dev/sequencer'
4768: setfacl(1) exit code != 0 but OK as some missing files are expected
4768: released lock on /var/lib/hal/acl-list
4770: attempting to get lock on /var/lib/hal/acl-list
4770: got lock on /var/lib/hal/acl-list
4770: adding ACL's for /dev/sequencer2
4770: invoking 'setfacl -m u:42:rw /dev/sequencer2'
4770: setfacl(1) exit code != 0 but OK as some missing files are expected
4770: released lock on /var/lib/hal/acl-list
4772: attempting to get lock on /var/lib/hal/acl-list
4772: got lock on /var/lib/hal/acl-list
4772: adding ACL's for /dev/snd/timer
4772: invoking 'setfacl -m u:42:rw /dev/snd/timer'
4772: setfacl(1) exit code != 0 but OK as some missing files are expected
4772: released lock on /var/lib/hal/acl-list
4779: attempting to get lock on /var/lib/hal/acl-list
4779: got lock on /var/lib/hal/acl-list
4779: adding ACL's for /dev/hdc
4779: released lock on /var/lib/hal/acl-list
Run started hald-probe-smbios (10000) (0)
!  full path is '/usr/libexec/hald-probe-smbios', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-smbios exited
Run started hald-addon-input (0) (0)
!  full path is '/usr/libexec/hald-addon-input', program_dir is '/usr/libexec'
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-storage-cleanup-all-mountpoints (10000) (0)
!  full path is '/usr/libexec/hal-storage-cleanup-all-mountpoints', program_dir is '/usr/libexec'
/usr/libexec/hal-storage-cleanup-all-mountpoints exited
Run started hald-addon-cpufreq (0) (0)
!  full path is '/usr/libexec/hald-addon-cpufreq', program_dir is '/usr/libexec'Run started hald-addon-acpi (0) (0)
!  full path is '/usr/libexec/hald-addon-acpi', program_dir is '/usr/libexec'
Run started hald-addon-acpi-buttons-toshiba (0) (0)
!  full path is '/usr/libexec/hald-addon-acpi-buttons-toshiba', program_dir is '/usr/libexec'
/usr/libexec/hald-addon-acpi-buttons-toshiba exited
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hald-probe-serial (10000) (0)
!  full path is '/usr/libexec/hald-probe-serial', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-serial exited
Run started hald-probe-serial (10000) (0)
!  full path is '/usr/libexec/hald-probe-serial', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-serial exited
Run started hald-probe-serial (10000) (0)
!  full path is '/usr/libexec/hald-probe-serial', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-serial exited
Run started hald-probe-serial (10000) (0)
!  full path is '/usr/libexec/hald-probe-serial', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-serial exited
Run started hald-probe-storage (10000) (0)
!  full path is '/usr/libexec/hald-probe-storage', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-storage exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hald-addon-storage (0) (0)
!  full path is '/usr/libexec/hald-addon-storage', program_dir is '/usr/libexec'
Run started hald-probe-storage (10000) (0)
!  full path is '/usr/libexec/hald-probe-storage', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-storage exited
Run started hald-probe-volume (4794: attempting to get lock on /var/lib/hal/acl-list
4794: got lock on /var/lib/hal/acl-list
4794: adding ACL's for /dev/audio
4794: invoking 'setfacl -m u:42:rw /dev/audio'
4794: setfacl(1) exit code != 0 but OK as some missing files are expected
4794: released lock on /var/lib/hal/acl-list
4798: attempting to get lock on /var/lib/hal/acl-list
4798: got lock on /var/lib/hal/acl-list
4798: adding ACL's for /dev/snd/controlC0
4798: invoking 'setfacl -m u:42:rw /dev/snd/controlC0'
4798: setfacl(1) exit code != 0 but OK as some missing files are expected
4798: released lock on /var/lib/hal/acl-list
4796: attempting to get lock on /var/lib/hal/acl-list
4796: got lock on /var/lib/hal/acl-list
4796: invoking 'setfacl -x u:42 /dev/audio -x u:42 /dev/dsp -x u:42 /dev/mixer -x u:42 /dev/sequencer -x u:42 /dev
/sequencer2 -x u:42 /dev/snd/controlC0 -x u:42 /dev/snd/pcmC0D0c -x u:42 /dev/snd/pcmC0D0p -x u:42 /dev/snd/pcmC0D
6c -x u:42 /dev/snd/pcmC0D6p -x u:42 /dev/snd/seq -x u:42 /dev/snd/timer'
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0_0, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_oss_mixer__1, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/computer_oss_sequencer, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/computer_oss_sequencer_0, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_alsa_control__1, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_0, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_0, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_6, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_6, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/computer_alsa_sequencer, uid 42
Emmitting ACLRemoved for udi /org/freedesktop/Hal/devices/computer_alsa_timer, uid 42
4796: released lock on /var/lib/hal/acl-list
in hal-storage-cleanup-all-mountpoints
hal_mtab = ''
4800: attempting to get lock on /var/lib/hal/acl-list
4800: got lock on /var/lib/hal/acl-list
4800: adding ACL's for /dev/dsp
4800: invoking 'setfacl -m u:42:rw /dev/dsp'
4800: setfacl(1) exit code != 0 but OK as some missing files are expected
4800: released lock on /var/lib/hal/acl-list
4806: attempting to get lock on /var/lib/hal/acl-list
4806: got lock on /var/lib/hal/acl-list
4806: adding ACL's for /dev/mixer
4806: invoking 'setfacl -m u:42:rw /dev/mixer'
4806: setfacl(1) exit code != 0 but OK as some missing files are expected
4806: released lock on /var/lib/hal/acl-list
4808: attempting to get lock on /var/lib/hal/acl-list
4808: got lock on /var/lib/hal/acl-list
4808: adding ACL's for /dev/snd/pcmC0D0c
4808: invoking 'setfacl -m u:42:rw /dev/snd/pcmC0D0c'
4808: setfacl(1) exit code != 0 but OK as some missing files are expected
4808: released lock on /var/lib/hal/acl-list
4810: attempting to get lock on /var/lib/hal/acl-list
4810: got lock on /var/lib/hal/acl-list
4810: adding ACL's for /dev/snd/pcmC0D0p
4810: invoking 'setfacl -m u:42:rw /dev/snd/pcmC0D0p'
4810: setfacl(1) exit code != 0 but OK as some missing files are expected
4810: released lock on /var/lib/hal/acl-list
4812: attempting to get lock on /var/lib/hal/acl-list
4812: got lock on /var/lib/hal/acl-list
4812: adding ACL's for /dev/snd/pcmC0D6c
4812: invoking 'setfacl -m u:42:rw /dev/snd/pcmC0D6c'
4812: setfacl(1) exit code != 0 but OK as some missing files are expected
4812: released lock on /var/lib/hal/acl-list
4814: attempting to get lock on /var/lib/hal/acl-list
4814: got lock on /var/lib/hal/acl-list
4814: adding ACL's for /dev/snd/pcmC0D6p
4814: invoking 'setfacl -m u:42:rw /dev/snd/pcmC0D6p'
4814: setfacl(1) exit code != 0 but OK as some missing files are expected
4814: released lock on /var/lib/hal/acl-list
4816: attempting to get lock on /var/lib/hal/acl-list
4816: got lock on /var/lib/hal/acl-list
4816: adding ACL's for /dev/snd/seq
4816: invoking 'setfacl -m u:42:rw /dev/snd/seq'
4816: setfacl(1) exit code != 0 but OK as some missing files are expected
4816: released lock on /var/lib/hal/acl-list
4818: attempting to get lock on /var/lib/hal/acl-list
4818: got lock on /var/lib/hal/acl-list
4818: adding ACL's for /dev/sequencer
4818: invoking 'setfacl -m u:42:rw /dev/sequencer'
4818: setfacl(1) exit code != 0 but OK as some missing files are expected
4820: released lock on /var/lib/hal/acl-list
4822: attempting to get lock on /var/lib/hal/acl-list
4822: got lock on /var/lib/hal/acl-list
4822: adding ACL's for /dev/snd/timer
4822: invoking 'setfacl -m u:42:rw /dev/snd/timer'
4822: setfacl(1) exit code != 0 but OK as some missing files are expected
4822: released lock on /var/lib/hal/acl-list
4829: attempting to get lock on /var/lib/hal/acl-list
4829: got lock on /var/lib/hal/acl-list
4829: adding ACL's for /dev/hdc
4829: released lock on /var/lib/hal/acl-list
Run started hald-probe-smbios (10000) (0)
!  full path is '/usr/libexec/hald-probe-smbios', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-smbios exited
Run started hald-addon-input (0) (0)
!  full path is '/usr/libexec/hald-addon-input', program_dir is '/usr/libexec'
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-storage-cleanup-all-mountpoints (10000) (0)
!  full path is '/usr/libexec/hal-storage-cleanup-all-mountpoints', program_dir is '/usr/libexec'
/usr/libexec/hal-storage-cleanup-all-mountpoints exited
Run started hald-addon-cpufreq (0) (0)
!  full path is '/usr/libexec/hald-addon-cpufreq', program_dir is '/usr/libexec'
Run started hald-addon-acpi (0) (0)
!  full path is '/usr/libexec/hald-addon-acpi', program_dir is '/usr/libexec'
Run started hald-addon-acpi-buttons-toshiba (0) (0)
!  full path is '/usr/libexec/hald-addon-acpi-buttons-toshiba', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hald-probe-serial (10000) (0)
!  full path is '/usr/libexec/hald-probe-serial', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-serial exited
Run started hald-probe-serial (10000) (0)
!  full path is '/usr/libexec/hald-probe-serial', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-serial exited
Run started hald-probe-serial (10000) (0)
!  full path is '/usr/libexec/hald-probe-serial', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-serial exited
Run started hald-probe-serial (10000) (0)
!  full path is '/usr/libexec/hald-probe-serial', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-serial exited
Run started hald-probe-storage (10000) (0)
!  full path is '/usr/libexec/hald-probe-storage', program_dir is '/usr/libexec'
/usr/libexec/hald-addon-acpi-buttons-toshiba exited
/usr/libexec/hald-probe-storage exited
Run started hal-acl-tool (10000) (0)
!  full path is '/usr/libexec/hal-acl-tool', program_dir is '/usr/libexec'
/usr/libexec/hal-acl-tool exited
Run started hald-addon-storage (0) (0)
!  full path is '/usr/libexec/hald-addon-storage', program_dir is '/usr/libexec'
Run started hald-probe-storage (10000) (0)
!  full path is '/usr/libexec/hald-probe-storage', program_dir is '/usr/libexec'
/usr/libexec/hald-probe-storage exited
Run started hald-probe-volume (


esta es la salida, si te hace falta algo estoy en contacto

---
*******anix_gdl********

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Angel Martinez Rodriguez sobre 05/12/2007, 16:29
que ondas joel, crees que si reinstalo el Hal del disco de centos se solucione el problema?

---
*******anix_gdl********

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Angel Martinez Rodriguez sobre 29/12/2007, 20:34
Hola joel,  sigo con mi problema instale el hal de el udev y dbus de el disco
y me pidio volver a hacer la actualizacion, la realize, reinicie y surgio el mismo problema  tienes alguna idea de que es lo que tenga que hacer

---
*******anix_gdl********

  • Aviso: Próxima actualización de AL Desktop: Udev 113, Hal 0.5.10 y Dbus 1.0.2.
  • Escrito por:Angel Martinez Rodriguez sobre 15/01/2008, 17:26
hola joel, no es mi intencion molestar solamente quiero saber si tienes idea de que es lo que tengo que hacer ya que no he podido resolber el problema, te agradesco

---
*******anix_gdl********